Baby Monitor Mount White with 1/4" Thread – Flexible Gooseneck Clip Holder for Cot & Crib, fits HelloBaby, eufy, VTech, BOIFUN, GHB & momcozy

Universal baby monitor mount – fits every camera with a 1/4" thread

Is your baby monitor camera sitting on the dresser, showing you nothing but the edge of the cot? Our clip mount with flexible gooseneck arm puts the camera exactly where you need it – a clear view into the crib, with no drilling at all.

Maximum compatibility: one mount for many brands

The mount features a standard 1/4" thread (6.35 mm, the same one used on tripods and cameras). It therefore fits any baby monitor camera with a 1/4" screw connection, regardless of the manufacturer.

These models fit directly – "Without adapter" version

• BOIFUN: Baby 6T, Baby 2S, VB805

• GHB: ABM700, ABM720, SM50B, VB807

• HelloBaby: HB65TX

• ieGeek: Baby 1T, Baby 5, Baby 7

• momcozy: BM01, BM03, BM04

• OBVHNUA: 900ES1, 900ES2

These models require an adapter plate

Check your original box first: for these baby monitors, the adapter plate with the 1/4" thread was usually included. If you still have it, the cheaper "Without adapter" version is all you need. Only choose a version with adapter if the plate is missing or lost:

• eufy E21, E20, C10 → "with adapter for eufy" version

• VTech VM901, VM928HD, VM5463 → "with adapter for VTech" version

• HeimVision Soothe 3 → "with adapter for HeimVision" version

• HelloBaby HB6550, HB6550 Pro, HB40, HB6339 → "with adapter for HelloBaby HB6550" version

• HelloBaby HB65, HB66, HB66 Pro → "with adapter for HelloBaby HB65" version

Your model isn't listed? Just take a look at the underside of your camera: if there's a round screw thread, the mount will usually fit as well.

Why a mount instead of a dresser or shelf?

• Finally the right viewing angle: the bendable gooseneck holds any position you set. You see the whole cot instead of just a corner of it.

• No more tipping over: the clip holds the camera firmly in place instead of sliding or falling at the slightest touch.

• No drilling: the clip opens to approx. 8 cm and grips securely on surfaces up to approx. 5.5 cm thick – shelves, table tops, dresser edges and headboards. No holes in the wall, movable at any time.

• Kind to your furniture: the clamp jaws are padded with foam. No pressure marks or scratches on lacquered or oiled surfaces.

• Reusable: keep it for your next baby monitor – the 1/4" thread is a standard and will stay one.

Technical highlights at a glance

• Standard thread: 1/4" (6.35 mm) – compatible with baby monitor cameras, action cams and tripod accessories.

• Shape-retaining gooseneck: solid aluminium core with a soft PVC sleeve. Once bent, it holds its position – the arm doesn't spring back and doesn't sag under the weight of the camera.

• Overall height: approx. 250 mm, so you can position it freely over the edge of the crib.

• Sturdy clip: 110 mm spring clamp with a wide contact surface, opening up to approx. 8 cm, secure clamping range up to approx. 5.5 cm. Fits most cot rails, shelves and headboards.

• Foam-padded clamp jaws to protect your furniture surfaces.

• Colour: white – blends discreetly into the nursery.

• Set up in minutes: attach the clip, screw on the camera, adjust the arm – done, no tools needed.

Safety notice

Position the mount so that the camera and cables stay out of your child's reach – we recommend a distance of at least 1 metre from the cot. Also secure the charging cable so it cannot hang down. Check regularly that the clip is still firmly seated.